| CPU |
 |
1.0 GHz Ultra Low Voltage (ULV) Celeron M 373
(with 512 KB L2 cache) processor |
|
Front Side Bus (FSB) of 400 MHz |
|
| Memory |
|
Single 200-pin DDR SODIMM socket provided |
|
Supports a single +2.5V DDR RAM SODIMM up to 1 GB |
|
Supports PC2700 DDR 333 (166 MHz) |
|
| PCI Bus/ISA Bus |
|
PCI 2.2 compliant (32 bit/33Mhz) |
|
DISA bus speed at 8 Mhz |
|
| IDE Interfaces |
|
Supports two enhanced IDE controllers (4 devices) |
|
Supports dual bus master mode |
|
Supports Ultra DMA 33/66/100 modes |
|
Supports ATAPI and DVD peripherals |
|
Supports IDE native and ATA compatibility modes |
|
| Serial Ports |
|
Two buffered TTL serial ports with full handshaking
(transceivers on baseboard) provided |
|
Provides two 16550-equivalent controllers, each with a
built-in 16-byte FIFO buffer |
|
Provides programmable word length, stop bits and parity |
|
Provides 16-bit programmable baud-rate generator |
|
Provides full modem capability |
|
| RS422 Ports |
|
Provides for Six RS422 ports connected to user IO connector |
|
Accessible through Rear IO Transition Board |
|
| USB Ports |
|
Supports two root USB hubs |
|
Supports four USB ports |
|
Supports USB v2.0 and legacy v1.1 |
|
Supports over-current fuses on baseboard |
|
Supports USB Boot and the respective USB Boot devices |
|
Three USB 2.0 ports made available at the connectors |
|
One USB 2.0 port for access to compact flash in offline mode |
|
| Keyboard/Mouse Interface |
|
Supports PS/2 keyboard & mouse |
|
| Audio Interface |
|
Supports AC97 standard |
|
AC97 CODEC provided on-board |
|
Audio amplifier provided on the card |
|
| Ethernet Interface |
|
Intel 82551QM Controller and one Ethernet port provided |
|
Supports magnetic and RJ45 connector on baseboard |
|
Supports IEEE 802.3 10BaseT/100BaseTX compatible
physical layer |
|
Supports Auto-negotiation for speed and duplex mode |
|
Supports full duplex or half-duplex mode |
|
Full-duplex mode uses IEEE 802.3x flow control to transmit
and receive frames simultaneously |
|
Half-duplex mode supports enhance proprietary collision
reduction mode |
|
Intel 82540EP based 10/100/1000 Base TX port |
|
Both the ports routed to Back Plane User IO Connectors and
accessible using Rear IO Transition Board |
|
| Video Interfaces (Crt) |
|
Supports CRT (1600 x 1200) with 64 MB UMA
(Unified Memory Architecture) |
|
Integrated 128-bit graphics controller provided |
|
| JTAG |
|
On-board JTAG chain for FPGA's |
|
On-board JTAG header for CPLD programming |
|
On-board JTAG interface to the processor for debugging
and development purposes |
|
| Miscellaneous |
|
Real-Time Clock (RTC) with external battery provided |
|
Supports battery-free boot |
|
Watchdog Timer feature provided |
|
| I/O Interfaces |
|
40 x TTL Differential o/p channels |
|
16 x TTL Differential i/p Channels |
|
8 x 28V/ Open Inputs |
|
8 x 28V / Open or GND/Open Outputs |
|
| LVDS Channel |
|
One LVDS TX Channel of data rates of up to 1.125 Gbps |
|
One LVDS RX Channel of data rates of up to 1.125 Gbps |
|
With combined data rates of up to 3.25Gbps in full Duplex mode |
|
Provided using external LVDS transceiver interfaced to FPGA |
|
| FPGA |
|
Provides on On-board Virtex 4 LX60 FPGA |
|
FPGA customizable to handle various digital IOs as per
customer LCD |
|
Interfaced to Processor on North Bridge on PCI Bus |
|
| Mechanical |
|
6U compactPCI card |
|
Board Dimensions: 160mm x 233mm |
|
Board thickness: 2.4mm |
|
Rugged Version with Heat Sink Metal Plate and Card Wedge
Locks |
|
| Power |
|
Derived from +5.0V and +3.3V of Back Plane |
|
All other voltages internally derived |
|
Power Consumption 20-Watts Approx |
|
| Environmental |
| |
Air Cooled |
Conduction Cooled |
| Operating Temperature |
-20°C to +50°C |
-40°C to +60°C |
| Storage Temperature |
-45°C to +100°C |
-40°C to +85°C |
|
| Operating Systems Support |
|
VxWorks (Ver 6.3 workbench 2.5) Board Support Package
(BSP), Windows CE (Ver 6.0) and Windows XP |
|
| Warranty |
|
1 Year limited warranty |
|
>