AT-XMC/PMC-DIO-Multichannel Discrete I/O Mezzanine Module on XMC / PMC

Overview
Product Specifications
Ordering Information

AT-XMC/PMC-DIO is a slave mezzanine card, providing x1 Lane PCI-Express interface or 32-bit PCI interface with the host system. It provides interface to different types of input and output signals for the avionics domain user interactions. The XMC/PMC discrete I/O boards are designed to provide users with a high degree of reliability and flexibility to meet input-output requirements. They are ideally suited for stringent military and airborne applications. AT-XMC/PMC-DIO has implemented all its discrete I/O logic in the FPGA. All discrete inputs and outputs are accessed through registers implemented inside the FPGA.

Discrete outputs can be used to switch +27V/GND/OPEN type loads. AT-XMC/PMC-DIO provides a total of 40 nos of discrete I/O interface to the PCI/PCIe bus. Twelve nos are +27V/OPEN type or casing break type inputs, eight nos are of Open/GND type inputs and an equal number of respective outputs. The card provides I/O interface through front panel mounted 68-pin PCB mount right-angled VHDCI receptacle connector or though rear XMC user I/O connector J16 or PMC I/O connector JN4 for accessing the I/O through back plane. On-chip timers are used for scheduled status reading of discrete inputs or drive of discrete outputs.

SOFTWARE

The AT-XMC/PMC-DIO software includes Drivers & APIs. The product comes with a powerful set of library functions to access the entire DIO functionality. The drivers are designed in a modular fashion consisting of component functions and application functions. The users test program can be developed with few calls to the driver by using the set of application functions provided. Driver and high-level API libraries for Windows XP, Windows 7 and Linux are available. LabVIEW drivers available optionally.

Bus Interface

XMC - x1 lane PCIe, 2.5Gbps (PCIe base specification 1.0a) or PMC - 32-bit, 33/66 MHz (PCI 2.2)

Discrete Inputs

	TTL Differential Inputs - 4 Nos for XMC and 2 Nos for PMC
	Open/GND (Common- break) Discrete Inputs - 8 Nos
	27V/Open or Casing/Break configurable Discrete Inputs - 12 Nos
	27V/Open or Casing/Break inputs are opto-isolated
	Open/GND (Common- break) Inputs are diode protected
	All Discrete Input Conditioning at TTL levels, level translated to 3.3V for internal use

Discrete Outputs

	TTL Differential Outputs - 4 Nos for XMC and 2 Nos for PMC
	Open/Gnd (Common-break) Discrete Outputs - 8 Nos
	27V/Open Discrete Outputs - 12 Nos
	Discrete Outputs can control +27V load, either low side or high side

Diagnostics

	Testing of memory functions
	Internal loop back
	External loop back
	Interrupt function testing

Others

	Software control of outputs and status of inputs using a dedicated Digital Discrete IO FPGA Core
	Discrete Inputs status changes by either polling or interrupt mode
	On-chip Timers for scheduled status reading of discrete inputs or drive of discrete outputs

Discrete I/O

	Optional Six Discrete Inputs & six Discrete Outputs
	TTL outputs and inputs

I/O Configurations

	I/O available on both front panel 68 pins VHDCI connector and rear connectors (P14 - PMC or P16 - XMC)
	Standard configuration is P16 rear panel I/O

Software Support

	Driver and high-level API libraries for Windows XP, Windows 7 & Linux
	Sample applications will be provided
	LabVIEW drivers available optionally

Physical

	Standard Singlewide Mezzanine Card form factor confirming to IEEE 1386.1 (74 mm x 149 mm)
	Conduction Cooled XMC/PMC Card without Bezel

Environmental

	Air Cooled	Conduction Cooled
Operating	0°C to +60°C	-40°C to +85°C

Power

	Supply +3.3V and +5V from PMC Connectors when used as a PMC Card and all other voltages internally derived
	Primary Supply +3.3V from XMC Connectors when used as XMC Card, all other voltages internally derived including +5V

Warranty

1 year limited warranty