cotsproducts-Multi Function Cards

AT-PMC-1553 + ARINC717

	PCI bus compatible
	PMC – 32-bit, 33/66 MHz (PCI 2.2)
	MIL-STD-1553B – Optional
	> Total-ACE controller from DDC
	> 4 Dual Redundant MIL-STD-1553 Channels
	> Supports MIL-STD-1553 A/B
	> BC, RT, MT or RT/MT Functionality
	> 64K x 16 RAM
	> External RT Address Inputs
	> Direct or Transformer Coupled
	> Autonomous Built-In Self-Test
	> 3.3 Volt Only Operation
	> Fully Integrated, MIL-STD-1553 Terminal & Transformer Solution
	ARINC717 – Optional
	> One Transmit and one Receive ARINC717 channel Operates from a single +3.3V supply
	> Selectable Harvard Bi-Phase (HBP) or Bi-Polar Return-to-Zero (BPRZ) receive channel and transmit channels with HBP and BPRZ encoders and line drivers
	> One selectable receive channel as HBP or BPRZ with integrated analog line receiver
	> Both HBP and BPRZ transmitters have integrated line drivers as well as digital outputs
	> 32-word by 12-bit FIFOs for both the receive and the transmit channel
	> Programmable slew rates on transmit channels: 1.5µs, 7.5µs or 10µs
	> Fast SPI transmitter write and receiver read modes
	Rear P14 or Front I/O available
	Optional Discrete Inputs and Outputs
	Driver & High-level API for Windows XP, Windows 7 and Linux
	More

AT-cPCI-MPAC

	Available on various industry standard & custom bus platforms
	UART
	> 1 each of RS-232 / 422 channels (Standard UART)
	DIGITAL I/O
	> 16 Channel Digital I/O (TTL/CMOS voltage)
	MIL-STD-1553B - Optional
	> 1 dual redundant channel
	> DDC controller
	> Programmable as BC, RT, MT modes
	> Direct or Transformer coupled
	ARINC429 - Optional
	> 1 ARINC429 controller (2 Transmit / 4 Receive Channels)
	> Configurable for High Speed/Low Speed
	> Programmable Interrupts
	> Software Driver support for a host of operating systems
	More

AT-PCI-MPAC

	Available on various industry standard & custom bus platforms
	UART
	> 1 each of RS-232 / 422 channels (Standard UART)
	DIGITAL I/O
	> 16 Channel Digital I/O (TTL/CMOS voltage)
	MIL-STD-1553B - Optional
	> 1 dual redundant channel
	> DDC controller
	> Programmable as BC, RT, MT modes
	> Direct or Transformer coupled
	ARINC429 - Optional
	> 2 ARINC429 controllers
	> 4 Transmit / 8 Receive Channels
	> Configurable for High Speed/Low Speed
	> Programmable Interrupts
	> Software Driver support for a host of operating systems
	More

AT-USB-MPAC

	Portable USB Device
	On Board resources (200MHz processor, 64Mbytes RAM, 16Mbytes Flash, 256Mbytes NAND Flash)
	MIL-STD-1553B – Optional
	> IPC1553 – Next generation 1553 core
	> 1 Dual Redundant MIL-STD-1553 Channel
	> Supports MIL-STD-1553 A/B
	> Each channel is independently programmable as either
	> Bus Controller, Remote Terminal or Bus Monitor
	> 1 Complete message programmability
	> 48-bit/100ns Time tagging
	> Direct or Transformer Coupled Bus Interface
	ARINC429 – Optional
	> IPC429 – Next generation 429 core
	> 8 Transmit and 8 Receive Channels
	> Configurable for High Speed (100 Kbps) or Low Speed (12.5Kbps/50Kbps)
	> Upto 256 Label memory for each Receive channel
	> 128 Word for Tx and Rx FIFOs for each Transmit and Receive channel
	> Asynchronous and Synchronous messaging
	> Programmable Interrupts
	> Programmable Refresh rates of 20ms to 200ms
	> Label selective trigger for Capture/Filtering and SDI filtering
	Optional 6 discrete inputs and 6 discrete outputs
	IRIG-B Time Code Input (Digital/Analog)
	IRIG-B Time Code Generator/Output (Digital)
	GPS Synchronization capability (optional)
	Software Driver Support for Windows 7 and Linux are available
	More

| | | | | | |